69
Down/Up (Bottom to Top). ‘Wipe’ also supports: Diagonal and Diamond
effect.
Wipe Size sets the ‘granularity’ of the ‘Wipe’ effect and so is only shown when
‘Wipe’ is the transition type. The smaller the number, the more elements there
are to the wipe. To clarify by example, if you select the Diamond wipe effect
and set a small number into the Wipe Size parameter, you will have a large
number of Diamonds present in the transition. On the other hand, a large
number loaded into the parameter will result in only one or two diamonds
being present during the transition.
9.14
Items Associated with the Adjust buttons group
This menu group allows re-programming of buttons on an attached CC-300
CORIOconsole, and also on some units with programmable front panel
buttons where the labels can be removed and customized.
For certain units without labeled buttons, this menu can be used when
‘Advanced menus=On’ in the System menu – this is to allow re-assignment of
buttons when necessary. If required, a firmware update or system restore can
be performed to put all buttons back to their defaults.
The Adjust Buttons sub menu allows the reassignment of the factory default
button associations. For instance, if you do not want button 3 to be associated
with RGB input number 1, you can redirect the button to another input or
feature.
You are strongly cautioned NOT to change the default assignments for
Window / Output switching for units with multiple windows or outputs (usually
the left-hand button). To do so may make control of your unit via the front
panel extremely cumbersome.
To change a button assignment, change the button number to match the one
to alter, and then choose the new button assignment.
Once altered to your new assignment, it is recommended that you store your
new settings.
Adjust buttons
Button [ 1] = Toggle ABZ
Adjust buttons
Shift [ 1] = Toggle 12
Adjust transitions
Wipe size [100]
Summary of Contents for C2-7100
Page 150: ......
