Tuttnauer 5075 HSG, Operation And Maintenance Manual

Page: 18 / 34

Page 16
START/STOP key
This key has the following functions:
 In the main screen:
o Starts the process when the required program was chosen.
o Stops the current process.
o Cancels the ERROR message displayed on the screen and releases the electric
door lock.
 In the menu directories:
o When the cursor is blinking on a number, the START/STOP key enables
moving to the next position.
o
When the cursor is blinking on a menu selection, the START/STOP key
activates that selection.
Printer
The printer prints the detailed history of each cycle performed by the autoclave. The printing
is on thermal paper with 24 characters per line. It records the sterilization cycle information for
subsequent consideration.
The printing is on thermal paper with 24 characters per line and contains the following
information:

Date:

Time:
 Ser. Num:
 Model:
 Version

Cycle Num:

Cycle:

Ster Temp:
 Ster Time:
 Dry Time:
 End Temperature
When the sterilization cycle begins the printer starts printing the above data.
After the preliminary printing, the autoclave starts performing the sequence of operations of
the cycle. The measured values of temperature and pressure are printed at fixed time
intervals, according to the phase of the process from the bottom up, beginning with the date
and ending with "Cycle Ended". For an aborted cycle, "Cycle Failed" and the Error message
are printed (refer to "Displayed Error Messages/Symbols").
Printer Handling
Maintenance
Wipe off any soiling on the printer surface with a dry soft cloth with a weak
neutral detergent. After that, wipe the printer with a dry cloth.
Setting paper
Printer model PLUS II Front view
1-Paper mouth
2-STATUS Led
3-OPEN key (for paper roll
compartment opening)
4-FEED key
5-Paper roll compartment
6-Paper end sensor
Fig. 1