7
CHAPTER 1 FEATURES AND ACCESSORIES
1.1 Product Features
This product uses a GSM SIM card. It can send multimedia messaging (MMS)
images to MMS enabled mobile phones. This allows users to check on the
monitored areas at any time and anywhere GSM/GPRS network coverage
and MMS service coverage is available.
This unit will support up to eight analog wired CCTV cameras, allowing
monitoring of multiple locations and from potentially multiple angles.
This unit supports up to four different types of wired sensors. Different
abnormal situations can be detected with corresponding detectors such as
-IR, -smoke, and -gas detectors.
Up to two output interfaces, support sirens or other alarm devices.
SMS message Remote control: Control and configure the camera with short
messages (SMS) commands from a mobile phone.
Double-mode alarm: The camera can send alarm messages via SMS and
MMS.
Fixed time monitor: The monitoring schedule can be set with multiple time
intervals.
Up to ten mobile phone numbers can be set to receive alarm messages.
Multiple warning phone numbers setting: A phone number can be set to
receive one or several cameras’ image. A camera can be set to send images
to one or several warning mobile phone via MMS.
The unit supports an external battery to insure operated normally in the event
of a power failure.
Motion detection: Detect and notify authorized users of any motion in the
monitored area(s).
Connect with computer to store images and alarm information: the on the
spot status of every camera can be checked with connected computer.
Downloadable user manual: This manual can be downloaded at any time via
SMS command.
