24
Super-Administrator
number has authority to disarm all cameras and the host.
Administrator
numbers have authority to disarm the camera(s) which are bound with
them.
Description:
After disarming the host, the indicator light will turn flashing green. See chapter
2.11 disarming the device for details.
Command:
The user must edit and send the following SMS command to the device in order
to:
Disarm the host
: #02#
(28)
Disarm the camera
: #02#
CameraNumber
#
(29)
Disarm all camera(s)
: #02#
*
#
(30)
•
CameraNumber
should be one digit number and in the range of “1” to “4”. It
should be the camera number which wants to disarm.
•
Replace
CameraNumber
with * means all connected cameras.
•
CameraNumber
can be replaced with Camera Description.
☺
Successful SMS reply:
Disarm the host successfully.
Disarm the camera * successfully.
Failed SMS reply:
If the camera number is invalid, the device will send a notification message via
SMS stating “Invalid camera number, please check and try again.”
CHAPTER 4 ADVANCED OPERATIONS
4.1
Network parameter settings
Description:
In general, the user does not need to set the network parameters before use. The
correct parameters have been set by the manufacturers according to every
country’s respective GSM provider. If the device is unable to send MMS
messages continually, the user can attempt to do the following.
