20
Command: *
*****************************
*
The user must edit and send the following SMS command to the device in order
to:
Add the Watchman number bound with the camera(s) and sensor(s)
:
(14)
#106#
WatchmanNumber#CameraNumber
#....
CameraNumber
#
SensorNumber
#..
..#
SensorNumber
#
Add the Watchman number bound with all camera(s)
:
(15)
#106#
WatchmanNumber
#*#
Add the Watchman number bound with all sensor(s)
:
(16)
#106#
WatchmanNumber
#S*#
Add the Watchman number bound with all camera(s) and sensor(s)
:
(17)
#106#
WatchmanNumber
#
•
WatchmanNumber
should be the mobile number to be added as a Watchman
number. The length of
WatchmanNumber
is in the range of three to nineteen
digits.
•
CameraNumber
should be a one digit number and in the range of “1” to “4”. It
should be the camera number which will bind with the
WatchmanNumber
.
•
Replace
CameraNumber
with * means all connected cameras.
•
CameraNumber
can be replaced with Camera Description.
•
SensorNumber
is in the range of “S1” to “S4”. It should be the sensor number
which will bind with the
Watchman
number.
•
Replace
SensorNumber
with S* means all connected sensors.
•
SensorNumber
can be replaced with
SensorDescription.
☺
Successful SMS reply:
Bind watchman number ******* to camera ***, sensor:******
Failed SMS reply:
If ten
Watchman
numbers are used on the device and the user attempts to add
another one, the device will reply “Watchman numbers list is full. Please delete old
number.”
3.7.2 Remove a watchman number / bound camera or
sensor
Authority:
Super-Administrator
number.
Description:
