21
•
If the user removes a bound camera or sensor from the
Watchman
number
successfully, the
Watchman
number will not receive the images captured by
the camera any more.
•
If the user removes a bound sensor from the
Watchman
number successfully,
the
Watchman
number will not receive the alarm information triggered by the
sensor any more.
•
If the user removes a
Watchman
number successfully, the mobile phone
would not be
Watchman
number of the device, and will not receive all the
alarm information from the device.
Command:
The user must edit and send the following SMS command to the device in order to:
Remove a bound camera and a sensor from a Watchman number
:
(18)
#107#
WatchmanNumber#CameraNumber
#
SensorNumber
#
Remove the bound camera(s) and sensor(s) from a Watchman number
:
(19)
#107#
WatchmanNumber#CameraNumber
#....
CameraNumber
#
SensorNumber
#..
.#
SensorNumber
#
Remove all bound camera(s) and sensor(s) from a Watchman number
:
(20)
#107#
WatchmanNumber
#
Remove all Watchman number(s)
: #107#
(21)
•
WatchmanNumber
should be the existing mobile number which falls under
the
Watchman
user category.
•
CameraNumber
should be a one digit number and in the range of “1” to “4”. It
should be the camera number which bound with the
WatchmanNumber
.
•
Replace
CameraNumber
with * means all connected cameras.
•
CameraNumber
can be replaced with Camera Description.
•
SensorNumber
is in the range of “S1” to “S4”. It should be the sensor number
which bound with the
Watchman
number.
•
Replace
SensorNumber
with S* means all connected sensors.
•
SensorNumber
can be replaced with
SensorDescription.
☺
Successful SMS reply:
Remove binding camera*** and sensor ****** from watchman number ******
Remove all watchman numbers successfully.
Failed SMS reply:
If the
Watchman
number is invalid, the device will send a notification message via
SMS stating “Watchman number does not exist, please check and try again.”
