29
automatically. The schedule can be reset again and again onto the device, and
the last setting will always be activated.
•
When the camera is under timing sends image status, the host will
automatically activate the function of sending out MMS information.
•
The user must set the following functions step by step.
4.3.1 Available timing sends MMS images
Command:
The user must edit and send the following SMS command to the device in order
to:
Available all camera(s) timing sends images via MMS: (40)
#115#1#
Available the camera timing sends images via MMS: (41)
#115#1#
CameraNumber
#
•
CameraNumber
should be one digit number and in the range of “1” to “4”.
•
CameraNumber
can be replaced with Camera Description.
☺
Successful SMS reply:
Timing sends MMS images activated.
Failed SMS reply:
Wrong parameter. Please check and try again.
4.3.2 Set time period to send MMS image
Command:
The user must edit and send the following SMS command to the device in order
to:
Set time period to auto-send MMS image for all camera(s): (42)
#116#
WorkDay
#
Period1StartTime
#
Period1EndTime#...#Period3StartTime
#
Perio
d3EndTime#
Set time period to auto-send MMS image for a camera: (43)
#116#
WorkDay
#
Period1StartTime
#
Period1EndTime#...#Period3StartTime
#
Perio
d3EndTime#CameraNumber
#
•
Up to three periods could be set on this command.
•
WorkDay
: one digit, the values lie in the range of “0” to “4”.
The following table contains the descriptions of each value:
