H. WIRELESS NETWORK FUNCTION
1. Installation
In the Memory card you will find the Malyan Link installation package, please follow
the prompts to install this software.
Once installation is complete Click Yes to install Virtual comport
Tip:
When removing the filament you can use the same method in reverse, but just
make sure before you pull the filament back that you push it forward first so that some
filament is extruded and then pull back gently, but quickly to disengage the filament
from the extruder.
NOTE:
The extruder cooling fan will come on anytime the extruder is above 50°C and
will turn of automatically when the extruder cools below 50°C, it is very important you
let the fan cool the extruder before removing power or this could cause the extruder
to jam or clog next time you use it.
14
