Turnigy Fabrikator II mini Instruction Manual Download Page 22 | Manualshive

Page: 22 / 24

background image

1. Clean extruder and nozzle frequently
2. Oil the X/Y/Z axis occasionally with specialised belt lubricant.
3. Preheat extruder properly before loading filament.
4. Check the extruder and platform calibration regularly.
5. Keep platform clean and empty when idle.
6. Keep printer away from dust and grime.
7. Keep printer clean and dry.
8. Keep printer at room temperature.

21

K. Maintenance

«
...
20
21
22
23
24
»

Summary of Contents for Fabrikator II mini

























Reviews:

No comments

Related manuals for Fabrikator II mini

ML-2240 - 23 Ppm Mono Laser Printer

Brand: Samsung Pages: 82

Brand: Samsung Pages: 8

ML-1610 - B/W Laser Printer

Brand: Samsung Pages: 134

ML-1610 - B/W Laser Printer

Brand: Samsung Pages: 112

Brand: Samsung Pages: 128

Brand: Samsung Pages: 152

ML 3471ND - B/W Laser Printer

Brand: Samsung Pages: 207

ML 2150 - B/W Laser Printer

Brand: Samsung Pages: 237

ML 3471ND - B/W Laser Printer

Brand: Samsung Pages: 103

ML 2150 - B/W Laser Printer

Brand: Samsung Pages: 217

ML-2010 - B/W Laser Printer

Brand: Samsung Pages: 122

Brand: Samsung Pages: 103

Brand: Fargo Pages: 6

Brand: Fargo Pages: 90

Brand: Fargo Pages: 126

Brand: FARGO electronics Pages: 278

Brand: idp Pages: 104

mC-Print3 MCP31LB

Brand: Star Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands