11
Finally click on the “Printer Shape” tab and input the settings below:
Using the X/Y axis buttons in the manual control move the print head to each corner
(about 5mm from the edges) and adjust the bed height at each corner until the print
head is very close to the printer platform, use a piece of ordinary A4 paper between the
print head nozzle and the platform to set the gap. The paper should be able to slide with
minimal resistance. If the paper is too tight, for instance there is a distinct indentation in
the paper or you need to pull hard to move the paper, lower the bed using the
adjustment screw. If it is too loose, for instance the paper moves with no resistance,
raise the bed slightly.
