Safety
Safety and Instructional Decals
•
Keep all safety signs legible. Remove all grease,
dirt and debris from safety signs and instructional
labels.
•
Replace all worn, damaged, or missing safety
signs.
•
When replacement components are installed, be
sure that current safety signs are affixed to the
replaced components.
•
If an attachment or accessory has been installed,
make sure current safety signs are visible.
•
New safety signs may be obtained from your
authorized Z Turf equipment dealer.
•
Safety signs may be affixed by peeling off the
backing to expose the adhesive surface. Apply
only to a clean, dry surface. Smooth to remove
any air bubbles.
•
Familiarize yourself with the following safety signs
and instruction labels. They are critical to the safe
operation of your Z Turf commercial equipment
decal93-7321
93-7321
1.
Cutting/dismemberment hazard of hands and feet,
rotating knives/blades—stay away from moving parts.
decal115-9625
115-9625
1.
Parking
brake—disengaged
2.
Parking brake—engaged
decal116-8535
116-8535
1.
Lower seed flow rate
2.
Higher seed flow rate
decal116-8536
116-8536
1.
Cutting blades - press down on lever and pull blade
control bail against the handle to engage the cutting
blades.
6
