18
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | [email protected] | www.turck.com
Cleaning faceplates
■
TX507(E)/TX510/TX513
10 Cleaning faceplates
The equipment must be cleaned only with a soft cloth and neutral soap product. Do not use
solvents.
11 Getting started
The PLC and Visualization functionalities of the TX500 HMI series must be programmed with the
CODESYS development tool which can be downloaded from
.
CODESYS is an IEC 61131 based programming software that must be properly installed on a
computer running Microsoft Windows.
Please refer to the additional Getting Started Documents available on