12
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | [email protected] | www.turck.com
Installation
5.1.1
Applying the gasket
The gasket should be applied on the rear of the frame.
Fig. 1: TX504E/TX507(E)
Fig. 2: TX510/TX513
A = gasket
B = installation cut-out
A = gasket
B = installation cut-out
5.2
Mounting of the HMI
➤
➤
Place the fixing brackets as follows:
➤
➤
Screw each fixing screw until the bezel corners get in contact with the HMI.
NOTE
The mounting material is part of the scope of delivery and can be ordered as spare
part, see
„15 Appendix: Accessories“ on page 22
.
