turck TX507, Operating Instructions Manual

Page: 19 / 24

19
V01.01.01 | 2016/07
12 System settings
TX500 HMI products have a system settings tool to allow configuration of system options.
The user interface of System Settings tool is based on a rotating menu. Use navigation buttons
Next/Back to scroll through the available options.
The active item is highlighted on the left side. The info pane on the right side shows relevant
information, when applicable. Touch the active item to start the associated function.
System Settings has two modes of operation:
Mode Description
Standard Mode Standard settings, only accessible if no CODESYS TargetVisu is running on the
HMI
Advanced Mode
(“Tap-Tap-Mode”) Advanced settings (including the standard settings),
also accessible if a CODESYS TargetVisu is running on the HMI
12.1 Access of system settings in Standard Mode
ATTENTION!
System modification during operation
Undefined machine states due to device restart or loss of functionality!
➤ ➤
Do not modify the system/network settings during operation.
➤ ➤
Always set the machine to stop and disconnect the HMI from the machine when
modifying the system settings.
Status Description
Factory default status Press “System Setting” button on the HMI screen
If CODESYS TargetVisu is running
on the HMI It is not possible to access the Standard Mode , if necessary use
the Advanced mode (“Tap-Tap-Mode”), see
„12.2 Access of system
settings in Advanced Mode (“Tap-Tap-Mode”)“ on page 20 .