turck TBEN-LH-8IOL, Configuration Manual, Page: 3 / 48

3
1 General Information 5
1.1 About these instructions 5
1.2 Explanation of symbols used 5
1.2.1 Warnings 5
1.3 Contents 6
1.4 Feedback about these instructions 6
1.5 Technical support 6
2 Getting Started 7
2.1 About this document 7
2.2 Factory default IP address 7
2.3 Address switches 8
2.3.1 Static rotary mode 8
2.3.2 BOOTP mode (300) and DHCP mode (400) 8
2.3.3 PGM mode (500) 9
2.3.4 PGM-DHCP mode (600) 9
2.3.5 Factory Reset mode (900) 9
2.3.6 Restore IP Address (000) 9
2.4 TURCK Service Tool (TST) 10
2.4.1 Search (F5) 11
2.4.2 DHCP (F6) 11
2.4.3 Set IP address using Web server 13
2.5 BOOTP/DHCP utility 14
3 TBEN-LH-8IOL Controls Reference 17
3.1 Device Overview 17
3.1.1 Dimensions and connector assignment 17
3.1.2 Power connector pin assignment 17
3.1.3 IO connector pin assignment 17
3.1.4 Power supply 18
3.1.5 LEDs 19
3.2 IO data map 21
3.2.1 General overview 21
3.2.2 Input data map 22
3.2.3 Output data map overview 24
3.3 Application Requirements 27
3.4 IO-Link Port Setup 28
3.4.1 Open Web Server 28
3.4.2 Administrator access 29
3.4.3 Basic Parameter Setup 29
3.4.4 IOL Master Default Setup 30
3.4.5 VAUX Control 31
4 Configure TBEN-LH-8IOL with Rockwell PLC 33
4.1 TBEN-LH-8IOL Configuration using EDS files 33
4.1.1 Install EDS file 33
4.1.2 Create a new module 34