turck TBEN-LH-8IOL, Configuration Manual, Page: 10 / 48

10
2.4 TURCK Service Tool (TST)
The TURCK Service Tool can be downloaded from the TURCK Web site at:

Enter “TURCK Service Tool” in the search field

Download and install the tool
Figure 2.3 – TURCK Web page
The tool has a set of action buttons in the tool bar:
Figure 2.4 – Service Tool
The tool has following features:

Scanning for existing devices (F5). All modules are found through use of the protocols DCP
(PROFINET Standard) and IBTP (TURCK Service Protocol). With the IBTP protocol extended
information such as FW version and operating mode improved scanning are read out of
TURCK devices and displayed.

Setting an IP address (F2)

Locate device using Wink function (F3)

Actions menu that resets the device to the factory default or reset network (F4)

Supports the configuration of PROFINET modules, assigning the PROFINET name

Clipboard used for Copy: all, IP address or MAC address

Expert view, when enabled, provides additional functions like DHCP Server, ARGEE and
BEEP features by TURCK multiprotocol device

DHCP server

ARGEE status

BEEP status