turck TBEN-LH-8IOL, Configuration Manual, Page: 29 / 48

29
3.4.2 Administrator access
When someone is logged-in as an administrator, it gains the access to the device IP address setup, the
parameters setup and other control functions. The administrator access is controlled by the password,
which may be changed.
The procedure:

Enter “password” into LOGIN field
Figure 3.19 – Administrator login
NOTE
If you forget the password, reset the device to the factory defaults (900). Before the reset takes
place, save all IOL current setup, as it will be deleted and set to the factory defaults. After the
reset, the first thing to do is to assign an IP address to the device.
3.4.3 Basic Parameter Setup

Activate DXP outputs 1.3.5 and 7 by entering “yes” in the drop down selection dialog

If DXP output short condition needs to be confirmed by the PLC, enter “yes” in the drop down
selection dialog
Figure 3.20– Basic parameter setup