V2.0 | 2021/06
11
Diffuse mode sensor with NO function
When used a diffuse mode sensor with an NO function, a switching point is taught in for a
switch output. The output behaves as follows:
0
1
SP1
detection range
blind
zone
Fig. 6: Diffuse mode sensor with NO function – Behavior of the switching output
Window function
The start and end point of the switch window range can be set for the outputs. The switch
window must be within the detection range.
0
1
SP1
SP2 max
detection range
blind
zone
out
Fig. 7: Window function – Behavior of the switching output
