Setting
Setting via the pushbuttons
46
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | [email protected] | www.turck.com
Window function – switching between hysteresis and window
Choice:
window /
hysteresis*
Out2
Out1
GND/T1 > 8 s
13 s
LED GN 2 × 1 Hz
GND/T1 > 8 s
13 s
LED YE 2 × 1 Hz
Measure and save
Fail
LED GN/YE
1.5 s × 5 Hz
Hysteresis
LED YE
1.5 s × 5 Hz
GND/T1 > 2 s
7 s
LED GN 1 × 1 Hz
Window
LED GN 1.5 s × 5 Hz
GND/T1 > 8 s
13 s
LED GN 1 × 8 Hz
Select
Normal
operation
* Set window
function before
Fig. 41: Window function – switching between hysteresis and window
Position the object at any point in the detection range.
Press and hold down pushbutton 1 for 8…13 s.
Press and hold down pushbutton 1 once more for 8…13 s.
a
The individual switching point has been taught in successfully if the green LED flashes for
1.5 s at a frequency of 5 Hz.
a
The hysteresis function has been taught in successfully if the yellow LED flashes for 1.5 s
at a frequency of 5 Hz.
