Page 6 of 20
Turbovex A/S
Industrivej 45, DK – 9600 Aars
Telefon: +45 96 98 14 62 – Fax: +45 98 96 42 24
e-mail:
–
www.turbovex.dk
4.2.0 Placement
Turbovex TX 3100A is intended for installation through the roof. The unit can be placed in
roofs with inclines ranging from 0 to 45 degrees. Turbovex TX3100A is available with two
types of mounting brackets.
The standard mounting bracket places the inspection hatch inside the building.
The special mounting bracket is intended for use if you want the hatch placed outside the
building.
4.3. Template
It is a good idea to create a template according to the
incline of the roof. Remember to mark 2 notches and
a center hole. The notches are for placing the unit
horizontally.
a
0 = Ø870 mm
a
5 = 870 x 880 mm
a
10 = 870 x 890 mm
a
15 = 870 x 900 mm
a
20 = 870 x 930 mm
a
25 = 870 x 970 mm
a
30 = 870 x 1010 mm
a
35 = 870 x 1070 mm
a
40 = 870 x 1140 mm
a
45 = 870 x 1240 mm
Standard bracket
Special bracket
