Page 19 of 20
Turbovex A/S
Industrivej 45, DK – 9600 Aars
Telefon: +45 96 98 14 62 – Fax: +45 98 96 42 24
e-mail:
–
www.turbovex.dk
7.2.0 Filter change
There is to filters in the TX 3100A there need to be
changed. If the filter change indicator lights up,
change the filters. Maintenance of the filters is
necessary or else you will damage the heat
exchanger and the unit will not work
The exhaust air filter is placed in the bottom of the
unit and is easy to remove and replace a new one.
The only ting there is holding the filter is a rubber on
the edge of the filter.
The rubber seal must be placed so the circular part is
facing outwards. Otherwise air leakage will occour
and there will be a fall hazard of the filter.
The supply air filter is placed at the outside under the
top cone, who’s projecting against wind and weather.
The filter stuck with Velcro and is therefore easy to
remove and replace a new one.
If you have some space problems when changing the
filter, it’s possible to remove the top cone.
