Page 12 of 20
Turbovex A/S
Industrivej 45, DK – 9600 Aars
Telefon: +45 96 98 14 62 – Fax: +45 98 96 42 24
e-mail:
–
www.turbovex.dk
4.7.0 Installing top extension
Mount the inner part of the top
extension:
The spiral duct goes out around
the collar and secured with the
supplied screws. The attachment
points are marked with yellow
marks.
Make sure the drain hole is
located above the blinded hole
on the unit!
The electrical cubicle is screwed
onto the spiral duct and wiring
installed in accordance with the
wiring diagram in section 6.0.0.
Mount the outer part of the top
extension:
The top-extension's plastic
cover is mounted on top of the
unit's plastic cover and is
fastened with the supplied
screws through the bottom
holes in the metal collar.
The filter holder and jet hood
are installed in accordance with
section 4.4.0.
