TurboTronic TurboAir TT-AF4, Instruction Manual

Page: 9 / 11

Tip: You can use a degreasing liquid to remove any remaining dirt.
4 Clean the inside of the appliance with hot water and a non-abrasive sponge.
Any other servicing should be performed by an authorized service representative.
Storage
1 Unplug the appliance and let it cool down.
2 Make sure all parts are clean and dry before you store the appliance.
Environment
Do not throw away the appliance with the normal household waste when it is exhausted, but hand it
in at an official collection point for recycling. By doing this, you help to preserve the environment.
.
Guarantee and service
If you need service or information or if you have a problem, please contact your local authorized
service centre
Troubleshooting
This chapter summarizes the most common problems you could encounter with the appliance.
Problem Possible cause Solution
The air fryer does not
work
The appliance is not
plugged in.
Put the mains plug in an earthed wall socket.
You have not press
START.
Press the START button after selecting the
menu , to start cooking.
Several appliances are
connected to one socket.
Try a different socket and check the fuses. The
air fryer has a power of 1400W.
The outside of the
appliance becomes
hot during use.
The outside of the
appliance becomes hot
because the heat inside
radiates to the outside
walls.
This is normal. But the handles, panel that you
need to touch during use will still stay cool
enough to touch.
The fry pot, rack and the inside of the fryer will
always become hot when the appliance is
switched on to ensure the food is properly
cooked. The fry pot and rack are always too
hot to touch.
The ingredients fried
with the air fryer are
not done.
The amount of
ingredients in the fry pot
is too big.
Put smaller batches of ingredients in the fry
pot. Smaller batches are fried more evenly.
The set temperature is Adjust the temperature according to the