TURBOLOCK TL116 7
2.3 Battery Information
The lock requires four standard or rechargeable ‘AA’ batteries. New batteries should be installed as soon as possible after receiving
the first low-battery warning, as indicated by a single red flash on the indicator and a voice confirmation:
“Low battery. Please replace the battery.”
After that first notification, the lock will only have enough power for approximately 50 uses before the batteries are fully depleted.
Low-battery notification will come from the lock itself.
2.4 Usage Overview
When using the passcodes, the TL116’s backlight will turn on. Press the “ “ button on keypad to lock. You can also use one of the
included physical keys to open the lock directly.
Using the Admin Passcode
Use the keypad to enter the Admin Passcode, and then press ‘ ’ to unlock the door.
For added security, the Admin Passcode must be changed from the manufacturer’s default after installation and initial testing.
See Section 6.
U
sing the Emergency Power Port
Supply power via the Emergency Power Port on the bottom of the lock. The backlight will flash indicating the lock is receiving power.
Enter a Passcode and then press ‘ ’ to unlock the door as usual.
Using a User Passcode
Use the keypad to enter the passcode, then press ‘ ’ to unlock the door.
• The TL116 features a Mute Function. See Section 7.
• If a Passcode has been entered wrong 5x in a row, the lock will go into a 5-minute period of inactivity where it cannot be
used, except with the included physical key. This is a security feature designed to prevent unwanted parties from using the
lock
.
