TURBOLOCK TL116 19
6.2 Adding Keypad Passcodes
Keypad passcodes can be generated so that more people can gain entry access as needed.
USE WITH CAUTION. Anyone with the keypad passcode can unlock the TL116 until the keypad passcode is deleted. If more
control is needed, refer to Section 8.
• The admin must create passcodes for users.
• Keypad passcodes must be 6 digits long.
• The TL116 can hold up to 9 keypad passcodes.
Step 1.
Press ‘ ’ on the keypad, and enter the current Admin Passcode. Then press ‘ ’ again. Voice navigation will guide you
through the process:
“To set up a user passcodes, please press 2.”
Step 2.
Enter ‘2’ then press ‘ ’. Follow the voice prompt:
“Please enter the new user passcode.”
Step 3.
Enter a new keypad passcode, and then press ‘
’. After the voice confirmation (“Success”), the new passcode has been
saved.
You can create multiple passcodes (up to 9 total) in Step 3 so long as the keypad backlight is still on. If the keypad backlight
turns off, you must go back to Step 1 to create a new keypad passcode.
Step 4.
Test the new passcode(s) to confirm the modification was successful.
