background image

TurboLock TL - 201     27 

of production if the product is no longer made or stocked. This Warranty is not assignable or transferable. The original purchaser 

may call the toll-free number at 855-850-8031 for service requests.

When a product or part is exchanged, any replacement item becomes your property and the replaced item becomes WP’s property. 

This warranty only covers technical hardware defectiveness during the warranty period and under normal use conditions. WP does 

not warrant uninterrupted or error-free operation of this Product. 

This Warranty does not cover any damage due to: (a) transportation; (b) storage; (c) improper use; (d) failure to follow the product 

instructions or to perform any preventive maintenance; (e) modifications; (f) unauthorized repair; (g) normal wear and tear; or (h) 

external causes such as accidents, abuse, or other actions or events beyond our reasonable control. 

Important:

 Do not disassemble the Product. Disassembling the Product will void this Warranty.

 Only WP or a party expressly 

authorized by WP should perform service on this Product.

DISCLAIMER OF WARRANTY:  THE REMEDIES DESCRIBED ABOVE ARE YOUR SOLE AND EXCLUSIVE REMEDIES 

AND OUR ENTIRE LIABILITY FOR ANY BREACH OF THIS LIMITED WARRANTY. OUR LIABILITY SHALL UNDER NO 

CIRCUMSTANCES EXCEED THE ACTUAL AMOUNT PAID BY YOU FOR THE DEFECTIVE PRODUCT, NOR SHALL WE UNDER 

ANY CIRCUMSTANCES BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, SPECIAL OR PUNITIVE DAMAGES OR 

LOSSES, WHETHER DIRECT OR INDIRECT.

SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO 

THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. 

THE DURATION AND REMEDIES OF ALL IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE WARRANTIES OF 

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE DURATION OF THIS EXPRESS 

LIMITED WARRANTY.

Summary of Contents for TL-201





























Reviews: