Turbolock TL-201 User Manual Download Page 13

Page: 13 / 28

TurboLock TL - 201 13

Check and adjust the cables as needed to make sure they are tucked away from any screw hole opening. Do NOT

force the screw through the cables as this will damage the lock and/or make it unusable.

Step 7.

Add batteries to the battery compartment, then slide the cover down over it. The lock should now be ready to use. It’s

highly recommended to use the keys and default password to test the lock to make sure it works before closing the

door. See Section 6 for information on the default admin password.

Section 4

Installation (New)

This section details installation steps needed if you are installing the TL-201 on a door without a cutout. If you are using

the TL-201 to replace an old lock or if your door otherwise already has a cutout, please go back to page 8.

•

For easier installation, have another person help to hold the lock etc.

•

For your convenience, installation instructions are broken into segments. Read and follow the instructions for both Pre-

Installation and Main Installation.

4.1 Pre-Installation

Part 1 Making the Opening

Step 1.

Using the provided template, mark the locations for the

centers of the backset and the latch hole.

Step 2.

Bore a 54mm (about 2” or 2 1/8”) hole on the door face, then drill a 25mm (about 1”) hole into the edge of the door

so that it intersects with the larger hole.

2” dia. hole

7/8” to 1” dia. hole

Backset

Latch Hole

Side Hole

Summary of Contents for TL-201




























Search results

Summary of Contents for TL-201

Reviews:

Related manuals for TL-201

Brands by name

Popular brands

Turbolock TL-201, User Manual

Search results

Summary of Contents for TL-201

Reviews:

Related manuals for TL-201

Brands by name

Popular brands