16
TurboLock TL - 201
Step 8.
Position the strike and strike box, then use a pencil to mark the center
points of the screw openings in the strike plate. Set the strike and strike
box aside and drill two small holes at each center point.
Step 9.
Position the strike and strike box. Add the 2x remaining wood screws and
use a screwdriver (not included) to secure them.
Part 4 Adjusting for Door Orientation
Step 1.
With the door open, check it from the back and/or inside of the room. The lock’s parts should be oriented differently
depending on whether the lock will be on the left side or right side of the door.
Step 2.
Remove the battery cover from the inside section of the lock and adjust the L/R Switch and thumb turn as needed.
Latch on the right
L/R switch pushed to
R side + thumb turn
horizontal
Latch on the left
L/R switch pushed to
L side + thumb turn
vertical
L R
L R
L R
L R
Inside Section
Inside Section
