turbofan MOFFAT BLUE SEAL 30D Series Installation And Operation Manual Download

Page: 35 / 38

Fault Finding

Error Message

(Screen Display)

Error Description

Fault

Remedy

Cavity Probe Error

Call For Service

Temp Probe error.

Oven temperature probe open circuit.

Call For Service.

Oven temperature probe short circuit.

Call For Service.

Cavity High Temperature Error

Call For Service

Oven Temp too high.

Heating control circuit fault.

Call For Service.

No Heat Error

Call For Service

Oven is not heating.

No temperature rise is

detected within 15 mins.

Call For Service.

I/O Error

Call For Service

Control error.

Touch controller fault.

Call For Service.

Fan Error

Call For Service

Fan overheating

Oven fan motor thermal

overload tripped.

Call For Service.

Core Probe Error

Call For Service

Core Probe error.

Core temperature probe short circuit.

Call For Service.

Configuration Files Invalid

Attempting To Restore

Call For Service

Controller Files error.

Configuration Error.

Controller SD Card fault.

SW Config Files incorrect.

Attempt to re-load the files.

Call For Service.

Hood is not running

Check hood

VH hood enabled,

but not fitted/

connected correctly

VH Hood not plugged in or not switched

ON.
Oven controller programmed incorrect-

ly.
Oven controller, wiring or VH hood

Ensure VH Hood is plugged in

& switched ON.

Call for service.

Summary of Contents for MOFFAT BLUE SEAL 30D Series







































Search results

Summary of Contents for MOFFAT BLUE SEAL 30D Series

Reviews:

Related manuals for MOFFAT BLUE SEAL 30D Series

Brands by name

Popular brands

turbofan MOFFAT BLUE SEAL 30D Series, Installation And Operation Manual

Search results

Summary of Contents for MOFFAT BLUE SEAL 30D Series

Reviews:

Related manuals for MOFFAT BLUE SEAL 30D Series

Brands by name

Popular brands