turbofan G32M, Operation Manual, Page: 5 / 24

This appliance must be installed in accordance with National installation codes and in addition, in
accordance with relevant National / Local codes covering gas and fire safety.
UNITED KINGDOM: GAS SAFETY (Installation & Use)
REGULATIONS 1984 (Amendment 1990)
AUSTRALIA: AS5601 / AG601 - 2000, Gas Installations Code
NEW ZEALAND: NZS5261, Installation of Burning Appliances and Equipment
UNITED STATES: ANSI 223.1 (Latest edition) National Gas Fuel Code
CANADA: CAN/CGA -B149, Installation Codes for Gas Burning Appliances and
Equipment
Installations must be carried out by authorised persons only. Failure to install equipment to relevant
codes and manufacturers specifications in this section will void warranty.
The oven and its individual shutoff valve must be disconnected from the gas supply piping system
during any pressure testing of that system at test pressures in excess of 3.45 kPa / 34.5 mbar (0.5psi).
This oven must be electrically grounded in accordance with local codes.
Installation must allow for a sufficient flow of fresh air for the combustion air supply. Combustion air
requirements:
Natural Gas (G20-UK) 10m³/hr
Propane Gas (G31-UK) 9m³/hr
Components having adjustments protected (e.g. paint sealed) by manufacturer are only allowed to be
adjusted by an authorised service agent. They are not to be adjusted by the installation person.
Before Connection to Power and Gas Supplies
• Remove all packing.
• Check equipment and parts for damage. Report any damage immediately to the carrier and
distributor.
• Remove protective plastic coating from the side panels.
• Check that the following parts have been supplied with your oven:
4 x Leg assembly
4 x Oven racks
1 x Water inlet elbow (c/w washer)
• Report any deficiencies to the distributor who supplied the oven.
• Fit the legs to the oven or fit oven to manufacturers stand.
• Check that the available power and gas supply is correct to that shown on the rating plate located
on the right -hand side panel.
Supply Requirements
3
Installation
Installation Requirements
It is most important that this oven is installed correctly and that operation is correct
before use.
Installation shall comply with local electrical, gas, health and safety requirements.
Natural Gas LPG Natural Gas - UK Propane - UK
(G20) (G31)
Input Rating 35 MJ/hr 35 MJ/hr 9.5 kW 9.5 kW
(N.H.G.C.) (33,000 Btu/hr) (33,000 Btu/hr) (0.91 m³/hr) (0.67 kg/hr)