turbofan G32M, Operation Manual, Page: 13 / 24

11
Operation
Oven Racks
The oven is supplied with four general purpose oven racks. These racks incorporate two important
safety features:
• Self Supporting: When fitted, the oven racks are self supporting and will not drop or angle down
when the racks are withdrawn during operation, when loading and unloading products on racks or
when attending to the product being cooked during it’s cook cycle.
• Auto Supporting: The oven rack supports incorporate a special retaining tab which provides a
positive stop to each oven rack and stops it’s inadvertent removal during normal operation.
To fit the oven racks follow the steps shown in the diagram below.
To remove oven racks reverse the procedure.
1
2
3
4
5
1. Fit the oven rack, positioning the rack back stop on top of the rack runner.
2. Slide the rack along the runner and ensure that the front stop is under the rack runner.
3. Slide the rack to the rear of the oven.
4. Allow the rack back stop to drop below the rack runner.
5. The rack can now be pulled forward and loaded as required.
NOTE: Components having adjustments protected (e.g. paint sealed) by manufacturer are only to be
adjusted by an authorised service agent. They are not to be adjusted by the user.