11
the two structures and the 20m for the connection of the structures with the
cabinet passing through the grounding, so that all the grounding points are
connected to each other. Make sure that the grounding of all cabinet structures
are connected to each other via the ground wire.
4.5. Recommendations for batteries installation
1. Make sure the inverter is turned off and has no grid connection.
2. Make sure the battery is also turned off.
3. Set up battery switches as follows:
4. Place the battery in the capsule structure with the corresponding screws.
5. If you incorporate a pair of batteries, connect them in parallel and to the
inverter. If you only have one battery, connect it directly to the inverter (picture
detail).
6. Connect the RJ cable to the CAN port of the master battery. Also connect the
Master Battery to the slaves with the corresponding RJ connector (picture detail).
Master battery:
Rest of batteries:
