background image

Turbinaire

 Operator’s Manual – Page 14 of 14 

LIMITED WARRANTY 

 
Turbinaire. warrants to the original purchaser that the Turbinaire equipment described in this manual will 
be  free  of  defects  in  materials  and  workmanship  for  a  period  of  TWO  (2)  YEARS  from  the  date  of 
purchase of a single speed model HVLP sprayer and THREE (3) YEARS from the date of purchase of a 
variable  speed  sprayer.  Turbinaire’s  only  obligation  shall  be  to  repair  or  replace,  at  its  option,  such 
product  proved  to  be  defective  during  the  warranty  period.  This  warranty  is  subject  to  the  timely 
notification and substantiation that such products have been stored, maintained and used in accordance 
with the Turbinaire. written instructions. A proof of purchase is required for all warranty claims. 
 
Customers  returning  goods  to  Turbinaire.  or  an  authorized  service  center  for  warranty  claims  will  be 
asked  to  prepay  freight  charges  within  reason.    Goods  returned  to  Turbinaire. or  an  authorized  service 
center for repair or maintenance must be clean and free from paint to allow for inspection.  Should any 
equipment  require  cleaning,  a  charge  will  be  made  whether  or  not  under  warranty.    Failure  to  change 
filters  as  needed  and  the  use  of  parts  other  than  genuine  Turbinaire  replacement  parts  that  cause 
damage to the unit will void the warranty.  
 
All  statements,  technical  information  and  recommendations  enclosed  are  based  upon  tests  that 
Turbinaire.  considers  reliable.  However,  neither  the  seller  nor  the  manufacturer  shall  be  liable  for  any 
injury, loss or damage, direct or consequential, arising from the use of the product or the inability to use 
the product. Before use, users shall determine the suitability of the product for his/her intended use.  The 
user assumes all risk and liability whatsoever in the use or failure to use the product, whether due to a 
product defect or not. Turbinaire’s only obligation shall be to replace or repair, at its option, the quantity of 
product  proved  to  be  defective  and  any  consequential  damages  shall  be  limited  to  the  volume  of  the 
Turbinaire equipment purchased. 
 
Except where prohibited by law, this warranty is exclusive and is in lieu of all expressed or implied rights, 
warranties and conditions, statutory or otherwise. 
 
For further information, please contact Turbinaire directly at: 
 
 

Canada (Head Office): 

291 Shannon Street, suite#201 
Montreal, QC 
H3C 2J6 

  

Tel:  (514) 396-5099 
Fax: (514) 396-0695 
 
E-mail:  

[email protected]

 

Internet:  http://www.turbinaire.com 

 
 
 
 

Summary of Contents for 1245GT















Reviews: