Turbinaire
Operator’s Manual – Page 2 of 14
Thank you for choosing Turbinaire HVLP (High-Volume, Low-Pressure) sprayers for your spray finishing
needs. At Turbinaire, we take pride in our precision-engineered products and want you to obtain all the
benefits that your Turbinaire sprayer has to offer.
To ensure your safety and satisfaction with your Turbinaire sprayer, please carefully read the information
contained in this manual before using your system. Should you require any further information, please
contact your nearest Turbinaire distributor or Turbinaire directly at
1-514-396-5099 or [email protected]
IMPORTANT: READ BEFORE USING
SAFETY PRECAUTIONS
•
CAUTION: Arcing parts. Keep the turbine at least 20 feet away from explosive vapors to avoid risk of
fire or explosion.
•
Only connect the power cord to a grounded circuit.
•
Never spray flammable materials near any source of open flame or spark.
•
Always spray in a properly ventilated area.
•
Never point the spray gun at anyone.
•
Always wear a spray mask and protective eyewear and clothing when spraying toxic substances.
•
Always follow the coating manufacturer’s safety precautions and instructions, and exercise extreme
caution when using materials with a flashpoint below 70º F (21º C)
•
Do not use halogenated hydrocarbon solvents. Halogenated hydrocarbon solvents such as methylene
chloride and 1,1,1 – Trichloroethane are not compatible with aluminum and may cause an explosion. If
unsure of a materials compatibility with aluminum, contact your coating supplier