Turbinaire
Operator’s Manual – Page 4 of 14
GETTING STARTED
Thank you for choosing a Turbinaire HVLP Sprayer for your spray equipment needs. The following steps
will help you get started quickly and easily.
For a condensed version of the Operating Instructions and Spraying Tips of your Turbinaire sprayer, please
refer to the yellow sheet included with your system. If this sheet is missing or has been lost, please contact
your local Turbinaire distributor or Turbinaire directly, we will be pleased to mail, fax, or e-mail you a new
copy.
The following instructions are meant to be a guideline for success with your Turbinaire sprayer. Although
practice makes perfect, there are a number of books, videos and courses available on the market to help
you further refine your knowledge and skills of spraying in general, should you wish to do so.
TURBINE & HOSE SET-UP
1. With power switch in OFF position, place turbine as far away from the spray area as possible and
plug into a standard power outlet.
2. Uncoil the 25’ air hose and install it hand-tight to the turbine air outlet. If you purchased
TSG-3295 (optional 5’ Heavy-Duty Hose) install it first and then install the 25’ hose to the male end
of TSG-3295. If you purchased TSG-3285 (optional 5’ flex hose) remove the brass Quick Connect
Coupler from the 25’ hose and install it on the male end of TSG-3285; then connect the female end
of TSG-3285 to male end of 25’ hose.
Although the hose is designed for industrial use, it is not crushproof. Do not stand on the hose for extended
periods. Also, the hose should never be used to pull the turbine or form a sharp angle at the air outlet – this
can cause premature wear of the hose, restriction of the airflow and/or overheating of the hose.
BNB SPRAY GUN TERMINOLOGY
COATING PREPARATION
Material Flow Adjustment Screw
Fan Size Adjustment Screw
Gland Nut
Sleeve Nut
Air Cap
Fluid Tip
Cam Lever
BNB Disk
: convert from
Bleeder to Non-Bleeder
by removing BNB Disk
Male Tail Piece
Pressurization Tube with Check Valve
Cup Top
Paint Cup
Pressurization Fitting
