Tunturi Go RUN 30, User Manual

Page: 27 / 32

C CAUTION
– Make sure that the running belt is aligned correctly to prevent
damage to the edges of the running belt.
1. Set the mains power switch to the on position.
2. Set the speed to 5 km/h.
3. Turn both adjustment bolts 1/4 turn clockwise an equal amount of times.
4. Slow down the running belt by holding onto the side handlebars and braking as
you walk.
5. If the running belt slips, turn both adjustment bolts 1/4 turn clockwise and repeat
the test.
6. If the belt keeps slipping after several tests, contact the dealer.
Defects and malfunctions
Despite continuous quality control, defects and malfunctions caused by individual
parts can occur in the equipment. In most cases, it will be sufficient to replace the
defective part.
1. If the equipment does not function properly, immediately contact the dealer.
2. Provide the model number and the serial number of the equipment to the dealer.
State the nature of the problem, conditions of use and purchase date.
Error codes
If the display shows an error code (marked with “E” + number), restart the equipment
and check whether the display still shows the error code. If the display still shows the
error code, immediately contact the dealer.
EN
RUN 30 27