Cleaning and maintenance
W
WARNING
– Before cleaning and maintenance, remove the mains plug from the
wall socket.
– Do not use solvents to clean the equipment.
▪ Do not block the ventilation openings. Keep the ventilation openings clear from
dust, dirt and other obstructions.
▪ Clean the equipment with a soft, absorbent cloth after each use.
▪ Clean the visible parts of the equipment with a vacuum cleaner with a small
suction nozzle
▪ Regularly check that all screws and nuts are tight.
Lubrication (fig. H)
The running belt must be checked for lubrication once per 2 months, based on the
average use of 60 minutes per day.
WARNING
– Before lubrication, remove the mains plug from the wall socket.
CAUTION
– Only lubricate the running belt if necessary. If you apply too much
lubricant, the running belt will slip easily due to lack of friction.
1. Stand steadily on the running belt.
2. Take hold of the front handlebar and push the running belt with your feet so that
it slides back and forth. The running belt must move smoothly and evenly without
making sound.
3. If the running belt does not move smoothly and evenly or if the running belt does
not move at all, touch the underside of the running belt with your fingertips to
check the lubrication:
EN
RUN 30
25
Summary of Contents for Go RUN 30
