Tunturi Go RUN 30, User Manual

Page: 20 / 32

C CAUTION
– Keep the console away from direct sunlight.
– Dry the surface of the console when it is covered with drops of
sweat.
– Do not lean on the console.
– Only touch the display with the tip of your finger. Make sure that
your nails or sharp objects do not touch the display.
Explanation of buttons
Button Explanation
START/STOP Press the button to start the training. Press the button
again to pause the training (max. 4 minutes). Press the
button again to continue the training. Press and hold
the button to stop the training.
MODE Press the button to show the value for a specific item:
time, distance, calories, pulse, laps and scan (items
one after another).
ENTER Press the button to confirm your selection.
SPEED +/- buttons Press the buttons to set the speed.
SPEED quick buttons Press the buttons to set the speed to the mentioned
value.
I/- buttons Press the buttons to set the incline.
INCLINE quick buttons Press the buttons to set the incline to the mentioned
value.
EN
20 RUN 30
NOTE
– The console switches to standby mode when the equipment is not
used for 10 minutes. To leave the energy saving mode, please press
start key for 1 second till the light turns on and then release the start
button to resume the training. All the training data will be re-started.