8
LOAD AND CHANGE OF FILAMENT SPOOL
Enter the control tab, choose the temperature in
the upper right corner depending on the material
and select the Remove Filament option.
Place the spool in the position of the image. The
filament should come from the bottom of the spool
up.
Place the spool in the bracket on one side and
approach it to the extruder as much as you can.
To load the filament, insert the filament through
the extruder inlet hole. Enter the control tab,
choose the temperature in the upper right corner
depending on the material and select the Filament
Loading option. Push the filament lightly until the
sprocket pulls it.
To load the filament or change the spool we have to follow the same steps, with the difference that if we only have to
load the filament and there is no spool placed in the printer we will skip the first step. This process will be done using
the Repetier Server controls.
Voladora
NX +
Voladora
NX +
