6
INSTALLATION AND SET UP
Once the Internet connection has been configured,
we will place the printing bed correctly in order to
calibrate our 3D printer.
Connect the printer to the network in two steps:
- Use a computer to connect to the Wifi of your printer with
the password “tumakerLS”.
- Once connected, open a browser and type 192.168.12.1
WIFI
1. If you want to connect via WiFi, choose the WiFi network
to which you want to connect.
2. Enter the network password
3. Add IP and Gateway
4. Click on Change
2. Open the Settings tab - Connectivity
3. Connect via Ethernet or WiFi always selecting the
STATIC option
ETHERNET
1. If you opt for the Ethernet option, connect a
network cable.
2. Assign the IP and gateway and click Change
