Any claim made under this Limited Warranty shall be
subjected to your notice of the alleged defect to Tumaker
or to a service company authorized by Tumaker within a
reasonable time of discovery and in any event not later
than the expiration date of the Warranty Period.
When making a claim under this Limited Warranty you
must provide (a) the Product (or affected part) and (b) the
original proof of purchase, clearly indicating the name
and address of the seller, the date and place of purchase,
the type of product, and the serial number.
What is not covered by the Limited Warranty?
1. User manuals or third party software, content, data
or links, configuration, included in or downloaded from
the Product or during installation, assembly or shipment,
as well as those incorporated at any other time in the
delivery chain or otherwise acquired in any way and in
any form by you.
Tumaker does not warrant that Tumaker’s software will
meet your needs, work in combination with any hardware
or software provided by an independent vendor, or resell,
repair, or replace the Product authorized by Tumaker.
2. Normal wear (including, but not limited to, wear of
moving parts). Defects caused by improper handling
(including, but not limited to, defects caused by sharp
elements, bending, compression or dropping, etc.).
Defects or damage caused by misuse of the Product,
including use contrary to instructions provided by
Tumaker (for the Product). Other acts beyond Tumaker’s
reasonable control.
3. Defects or alleged defects caused by the fact that the
Product was used with, or in connection with, any product,
equipment, software and/or service not manufactured or
supplied by Tumaker or was used in a manner other than
for its intended use.
4. The deterioration of the Product if it has been exposed
to inadequate environmental conditions, humidity or
extreme atmospheric or thermal conditions or to rapid
changes thereof, to corrosion, oxidation, spillage of food
or liquids or to the influence of chemical products.
5. A different firmware than the one provided nor the use
of a different printing base than the one recommended.
6. Direct or indirect damage resulting from the use of
a third-party printing material (one that has not been
supplied by Tumaker) or from the use of a consumable in
an unsuitable condition (with adhering elements, grease
residues or other similar incidents).
7. It does not cover damage caused by improper transport:
use of packaging other than the original.
8. It does not cover the connection at a voltage other than
that set by the manufacturer.
9. It does not cover if Tumaker products have been
repaired or altered by personnel other than Tumaker or
personnel not authorized by Tumaker.
10. It does not cover if the documentation and information
requested by Tumaker is not submitted.
11. It does not cover if the elements which by their nature
require periodic maintenance have not been carried out.
12. It does not cover if the lack of functionality is a
consequence of the lack of knowledge on the part of the
buyers.
WARRANTY
14
