Tulip MULTIDISC 250 XL VARIO, Operator'S Manual

Page: 23 / 73

4
PREFACE
This operator’s manual is meant for all personnel that are operating the machine and all personnel
who are responsible for its daily maintenance.
Read this manual fully and make sure you understand all of it before starting work or doing any
sort of maintenance.
Instructions accompanied by a warning triangle with exclamation mark are related to your safety
and/or that of others. These instructions should be observed with particular care and caution.
Instructions which may lead to serious material damage in case of non-compliance or incorrect
use are marked in the margin by an exclamation mark.
Machines and optional extras may be adjusted to specific regional conditions whilst they are also
subject to permanent research and innovation. For this reason, the specifications of your machine
may not be consistent with the pictures in this manual.
WARRANTY CONDITIONS
The 12 calendar months after date of purchase, the manufacturer will supply replacement parts
free of charge for all failed parts in normal operating conditions.
The right to withdraw warranty is reserved if the instructions mentioned in this manual have not
been followed (completely), if non original parts were fitted and/or the machine was modified
without explicit approval from the manufacturer. All damaged parts must be retained for
inspection and return carriage paid if required.
TYPE- AND SERIAL NUMBER OF YOUR MACHINE
The machine serial plate is fitted to the headstock.
In case of correspondence and ordering of spare parts, please state the type- and serial number of
your machine. Complete the box below with these numbers.
T Y P E N U M B E R
S E R I A L N U M B E R