- 13 -
ATTACHING DRIVE UNIT
ATTACHING DRIVE UNIT
L
WARNING
Make sure there is an audible click when plugging battery
pack onto the control unit. Otherwise, injury or damage
may occur.
ATTACHING THE CONTROL UNIT ON THE MOUNTING
BRACKET
1.
Temporarily remove the
controller setting screw from
the mounting plate.
2.
Align the controller to the mounting plate at about a 5
degree angle.
3.
Make sure the 2 grooves at the lower back of the controller
slide are positioned over the 2 extrusions at the bottom of the
mounting plate.
** Caution:
Failure to do so will result in an inoperable state
of the unit.
**
- 14 -
