- 24 -
POSITIONING THE PATIENT LIFTER
1.
Open the leg section of the floor lift to obtain stability.
FOR P420:
Step down on right side of “Leg Adjusting
Stepper” to open the legs to the maximum open position.
Step down on right to OPEN
FOR P425, P655:
Press the “FOOT” – “OPEN” symbol
button on the hand control to open
the legs to the maximum open
position.
L
WARNING
The legs of the patient lifter MUST be in the maximum
open position for stability and safety.
Maximum
Inside Open
is 34”
- 23 -
LIFTING THE PATIENT
LIFTING THE PATIENT
L
WARNING
1. DO NOT
exceed the maximum weight limit of
450/650 lbs
2.DO NOT
attempt to transfer until the user is assessed
by a qualified professional. Thoroughly read and fully
understand the instructions in this Owner’s Manual.
3. ALWAYS
keep hands and fingers clear of moving
parts to avoid injury. Individuals that use the universal
patient sling MUST be able to support their own weight,
otherwise injury may occur.
4. DO NOT
move the patient if the patient lift sling is not
properly connected to the attachment hooks on the lifting
bar. Check that the patient sling is properly connected
to the attachment holders BEFORE lifting the patient.
5.
During transfer, with the patient suspended in the
patient sling,
DO NOT
roll the base of the patient lifter
over any uneven surfaces that would cause the patient
lifter to become unstable.
6.
ALWAYS
use the handle on the mast assembly to
move the patient lifter to ensure the safety of the user.
