- 21 -
CLOSING/OPENING THE LEGS
To Open and Close the Legs on P420
Step down on left side of “Leg Adjusting Stepper” to close the legs
Step down on right side of “Leg Adjusting Stepper” to open the leg.
To Open and Close the Legs on P425
Press the open and close button on the
hand control.
USING THE CIRCUIT OFF/EMERGENCY STOP
RED emergency button on Control Unit
OFF
/ Push the RED emergency button in
to stop the lift arms from raising or lowering.
ON
/ To reset, rotate the emergency button
clockwise, an audible click can be heard
when the circuit is engaged.
Red button out = Powered On Red button pushed in = Power Off
NOTE
: When emergency button is pressed down, the circuit
is off and the unit will not function or charge.
- 22 -
ACTIVATING A MECHANICAL EMERGENCY RELEASE
EMERGENCY RELEASE
To activate the emergency release, twist and pull-down the
Red Knob
located on the top-end of Up-Down actuator drive
shift. The Red Knob will automatically rotate clockwise by
itself to slowly lower down the lift arm. Hold the Red Knob to
stop or slow the dropping speed until patient reaches the
safety surface.
Emergency Release Red Knob
located on top-end of Up-Down
actuator drive shift
Up-Down actuator drive shift
Twist and Pull-down Red
Knob for Emergency Release
Lift Arm Dropping down Hold the Red Knob to stop or
with Weight slow the dropping speed
