10
The appliance inlet is 3/8 S.A.E. male and is located at the front underneath the side
burner.
The minimum capacity propane cylinder for this side burner is 4 KG.
The intended use of this side burner is to be installed onto a Tucker GTS or GTR Trolley
or alternatively it may be set into brickwork or the like with the following clearances to
combustibles.
Minimum Top Clearance
-
Allow 800mm
Minimum Side Clearance
-
Allow 200mm
Minimum Rear Clearance
-
Allow 200mm
Be sensible about the location of your side burner.
The barbecue and side burner must be located on firm and level ground.
Do not locate the barbecue or side burner near combustible materials or surfaces,
either above or around the sides.
Do not obstruct any of the air ventilation openings, under or around the sides of the side
burner.
Connection of a side burner to a BBQ and or gas cylinder is as
follows.
For the attachment of a GTR ST or GTR SST Side Burner you will need to
disconnect the hose from the BBQ and re-connect it to the right hand side of the
side burner. Then connect the shorter hose supplied with the side burner to the left
hand side of the side burner and the other end to the BBQ inlet.
The hose connections must be connected firmly with a spanner.
Check that the hose is not kinked or under tension.
Apart from the connection point the hose must not be touching any part of the
barbecue or side burner where it may get hot and be damaged.