14
Turn the burner to the
“LOW” setting and adjust it if necessary by removing the
control knob and using a 2.4mm slotted screw driver you can adjust the
“low”
setting up or down to suit your gas pressure.
Note: Turn screw driver anti-clockwise to adjust the flame height up, NOTE, you
want to achieve the lowest flame height at
“ LOW” but you don't want to have it so
low that it blows out on its own or due to a breeze.
Check the operation of the ignition to the burners and make any necessary
adjustment.
Ensure the data plate is changed / altered to contain correct information i.e.
remove the old Gas type label and replace it with a natural gas label and date of
conversion.
For alternative types of installation, contact your nearest dealer.
OPERATING INSTRUCTIONS
1. Check the burner is turned off and gas fittings are properly connected.
2. Open the lid of the side burner, the lid or roasting hood must always be open
before lighting the side burner.
3. Check that the burner is fitted correctly
The GTRS burner cap must be sitting level on top of the burner base. The
two rings must be also sitting level covering the burner ports.
The GTR SS burner is already factory fitted into the appliance.
4. Do not use if strong winds are present.
5. Do not let children operate this appliance.
6. The lid must be closed when the burner is not in use.
