12
Once connected leak test all the connections by brushing a solution of soapy water
around the joints and the gas cylinder valve.
NOTE:
You must have the control knobs in the
off position and have the gas supply turned on at
the cylinder valve so as to do this leak test.
If bubbles appear around the connections you
have a leak.
Photo of what a typical leak looks like.
If you find a leak, turn off the gas supply and tighten or re-seal the connection.
Leak test the connections again.
Photo example of a good connection
i.e. no bubbles
If leaks are still present do not use the
barbecue, contact the place of purchase or
your local dealer.
For storage, cylinder exchange or refilling, disconnect the hose at the cylinder only.
Do not disconnect the hose from the appliance.
NOTE:
check for leaks after each
gas refill and re-connection.
Do not attempt to open or adjust the regulator, if you think it is not working
properly consult your local dealer.
.
