21
Farm-Clean
Tuchel Maschinenbau GmbH
ATTENTION: Do not allow the starter handle to beat back against the engine. Carefully return the handle to avoid damage to
the starter.
Illustration 2
4. Push the adjusting handle on the push bar towards the "turtle" (slow) or the "hare" (fast). (see Illustration 3)
Illustration 3
3.2.2. Turning off the Engine
Follow the procedure below to turn off the
Honda GCV 160
engine:
Push the adjusting handle on the push bar until it reaches the STOP sign. (see Illustration 2)
Illustration 2
Do not stop the engine by using the choke. This could cause backfire and could damage the engine.
3.2.3. Refuelling
The engine runs on normal unleaded car petrol:
Euro unleaded
•
Use fresh petrol.
•
Do not mix oil with petrol.
•
Do not replenish the fuel tank in a confined space.
•
Do not replenish the fuel tank when the engine is running. Wait at least two minutes for the engine to cool down
before refuelling.
•
Never turn on the engine when fuel has been spilled. Keep the engine away from the spilled fuel and avoid ignition
sources. Wait for the fuel to evaporate.
3.3 Moving
The machine has its own hydraulic drive. This enables it to make forward and backward movements.
To move, it is necessary to keep the appropriate movement handle in a certain position; the control is the handle located on top
of the pushing bar. When the handle is released, the machine will stop moving immediately. An illustration has been affixed to
the push bar of the machine as shown on the following illustrations.
The FARM-CLEAN has three different movement positions:
3. Pull the front handle towards you for the forward movement. The machine will now move forward. (see Illustration 1)
Front handle, forwards
Rear handle, backwards
Illustration 1
