20
Farm-Clean
Tuchel Maschinenbau GmbH
machine or other situations in which machine parts might have been affected, the machine must be thoroughly checked. Only
this way it can be guaranteed that , it is safe to operate the machine, even after an emergency.
2.5 Non-advisable use
•
It is not allowed to clean materials that are dangerous to human health in any way whatsoever.
•
It is advised not to drive the FARM-CLEAN without tools.
•
Do not use the machine in confined spaces.
3. The Cleaning Process
3.1 Recommended Application
The machine is mainly used for cleaning straight surfaces. The material to be cleaned depends on the coupled equipment.
When cleaning certain materials, (large) clouds of dust may be raised. The use of protective glasses is
therefore compulsory.
Particles might fly up due to the cleaning method. The operator has to make sure that there are no persons or
animals in the direct surroundings of the machine.
Under normal circumstances, the machine generates a noise level of +/- 96 dB (A). Prolonged exposure to this
sound level can result in serious hearing injury. This is why hearing protection must be used.
3.2 Engine
3.2.1 Starting the engine
Check the engine's oil level each time before using the FARM-CLEAN.
Type of engine oil:
SAE 5W40
Capacity of the Honda GCV 160 engine: 0.45 litre
Before the operator starts the engine, the machine must be checked and found in good order.
Upon starting the engine, the brush drive must be turned off. First turn off the brush, otherwise unexpected and dangerous
situations might arise.
Follow the procedure below to start the
Honda GCV 160
:
1.
Turn the fuel cock to ON.
2.
Push the adjusting handle towards the CHOKE position indicated by the choke symbol on the adjusting handle.
(see Illustration 1)
ATTENTION: Do not use the choke when the engine is hot or when the air temperature is high.
Illustration 1
3. Slowly pull the starter handle until you feel resistance, then pull firmly. (see Illustration 2)
